CAD model for sensor holder

calvsscalvss
in Technical questions
Hello!

I was wondering if the sensor holder would be able to accept QCMs with a different electrode shape, so I was thinking to modify the positions of the pogo pins.

Could I have a copy of the CAD model(s) of the sensor holder / sensor module?

Thanks

Comments

  • raffaele.battagliaraffaele.battaglia
    Hi Calvss,
    Yes, it is possible to use other electrode configurations. For example, if you have electrodes positioned on opposite sides of the crystal, you can mount the pogo pin contacts to accommodate this configuration. The sensor will be slightly tilted, but this setup works perfectly fine.
    Regarding the pogo pins on the sensor module and their spacing, these can be modified by adjusting the design. I've sent you the CAD files via email so you can review the current configuration.
    Please let me know if you need any further assistance or additional information.
Sign In or Register to comment.